HELGI - The Digital Courtyard
Via Artigiani 29/31 29020 Vigolzone (PC) Italy
E-mail: [email protected] | [email protected] | Web: www.HELGI-europe.com
4
HOMNGO36WB
USER MANUAL
Note:
1.
The default operating mode is on work status, you can just to power on the main power to start working on your
scheduled mode, the default operating mode is
“Always on”
operating mode;
2.
The equipment can be set when in standby mode, because the default operating mode is connect to main power, it
is in standby mode when pressing
“SWITCH”
after power on the main power, then you can set the time or switch in
operating mode;
3.
You can choose the operating mode by toggling switch in the
“Mode Options”
. It can be setted time by adjusting
“Hundreds”, ”Tens”, “Units”, then you can press
“Ok”
to confirm the operating mode after setting. Finally, press the
“Switch”
, it will work as what you set the operating mode.
4.
Time can not be setted in
“Sequencer”
mode, the defaulted digital number is displayed
“---”
.
5.
In
“Timer Off & Cycle”
modes, time can be setted and measured in minutes. If the time is showed “567” it means
the time is 567 minutes.
