Installation instructions article no.: 500645
Seite 2 von 3
Stand 17.01.2020
Installation:
•
Perform all handling operations on the illuminant only when the power is disconnected.
•
Place the ground spike at the selected place by following the safety and warning notes. Make
sure that no water can collect at the location.
•
Push the ground spike into the ground by hand. Please do not use a hammer or similar tool to
do this.
•
The ground spike cannot be rammed into rock. There is danger of injury and the spike could
become damaged.
•
Position the ground spike at the desired place. Make sure that the ground spikes are firmly
connected with the base.
•
Make sure that there are no obstacles in the walking area when laying the cable.
•
The must not be buried into the ground and must be freed from leaves and dirt if necessary.
•
Check the entire system at regular intervals for tightness, ability to function and possible
damage.
•
Check the proper connections once again.
•
The name plate must not be removed.
Assembly instructions:
Heitronic
®
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach Stein
