Installation instruction Art. No. 27898
Page 1 of 1
Status 10.2014
GB Installation and operating instructions
Light
Art. No. 27898
Many thanks for deciding to buy our lights.
Our light is made out of sturdy, high value materials and will provide you with quality lighting. The light can be
used indoors.
Please read through installation and operation instructions carefully and keep these in a safe place for
future reference.
We do not accept liability for damage to persons or property caused by non observation of the instructions,
improper handling or for unauthorized changes made to the product.
Package contents:
Light with ON/OFF switch
Installation and operating instructions
Technical data:
Article
Connection
Size
Illuminant
Prote
ction
type
Protection
Class
27898
DC 9-13V
1-spots
LED-illuminant ww ,
not changeable
IP 20
III
transformer
100-240V
AC, 50 Hz
Sec: DC 9-13V, 480mA
-
-
IP20
II
Before installation:
The light can only be operated outside of the packaging.
Take the light carefully out of the packaging.
Make sure, before using the light that it has not been damaged during transportation. The light must not
be used if the electrical parts are damaged. Repairs may only be done by a specialist electrician.
Keep packaging materials well away from children and pets. Suffocation hazard !
Safety and warning notes:
Use of the light is strictly forbidden if is damaged.
Never leave children at play without supervision in the area of lights.
The illuminant will become hot when used. The outer lamp housing will also become hot. Do not touch
the light with your bare hands when it is being used.
The entire product may neither be changed nor converted. Changes made to the product lead to
invalidation of the guarantee (warranty).
Care and servicing:
Make sure that the power supply has been disconnected before cleaning.
Use a dry, or slightly damp cloth for cleaning.
Never use chemicals or abrasives for cleaning.
Disposal:
Used electronic equipment must be brought to public connection points and must not be disposed of as
household waste.
Installation:
Make sure that the connection values of your building installation for the power supply to the light comply
with the data stated on the name plate of this light.
Make sure that the base is suitable and the weight of the lights can be supported permanently and
reliably.
Do not bend the cable, make sure that the cable and the plug are free from strain and rotational forces.
Protect all cables and insulations from possible damage.
The name plate must not be removed.
Heitronic
®
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
