Heinrichs Messtechnik GmbH
Ex- Supplement operating manual KDSE
Page 5 of 14
1.2
Hazard warnings
The purpose of the hazard warnings listed below is to ensure that device operators and maintenance personnel
are not injured and that the flow meter and any devices connected to it are not damaged.
The safety advisories and hazard warnings in the present document that aim to avoid placing operators and
maintenance personnel at risk and to avoid material damage are prioritized using the terms listed below, which
are defined as follows in regard to the instructions herein and the advisories pertaining to the device itself.
Warning
means that failure to take the prescribed precautions could result in injury, substantial material
damage or even death. Always comply to these warnings and proceed with caution.
Caution
means that failure to take the prescribed precaution could result in material damage or de-
struction of the device. We advice always to abide to these instructions!
Note
means that the accompanying text contains important information about the product, handling
the product or about a section of the documentation that is of particular importance.
1.3
Proper
use of the device
Warning:
The operator is responsible for ensuring that the material used in the sensor and transmit-
ter housing is suitable and that such material meets the requirements for the fluid being
used and the ambient site conditions. The manufacturer accepts no responsibility in regard
to such material and housing.
Caution:
In order for the device to perform correctly and safely, it must be shipped, stored, set up,
mounted operated and maintained properly.
