7
Electric Pressure Washer
Align holes on the bottom of the pressure
cleaner as shown and tighten the 2 screws, as
the fig.
Fit the wheel to the machine, as the fig.
Connection
1. Attach the high pressure hose to the
pressure water outlet of the machine.
2. Attach the spray handle to the high pressure
hose. Prior to operating the machine please
ensure that the high pressure hose has been
completely uncoiled. Whilst the machine is in
operation the hose MUST not loop.
3. Mount the nozzle or any other equipment you
want to use.
4. Connect the machine to the water and power
supplies.
INSTALLATION, ELECTRICAL AND WATER
CONNECTIONS
1. pressure cleaner
2. water supply hose
3. water connection
4. water inlet
5. high pressure tube
6. water outlet(backside)
7. spray gun
8. power supply
* No. 2, 3, 8 are not included
Pre-operation
ADJUSTING FAN PATTERN
The angle of spray coming out of the lance
may be adjusted on some lances by rotating
the nozzle. This will vary the spray pattern
from approximately a 0° narrow high impact
stream to a 60° wide fan spray.
( See Figure2)
A narrow stream has high impact force on
the cleaning surface and results in
maximum deep cleaning in a concentrated
area. However, this narrow high impact
spray must be used cautiously, as it may
damage some surfaces.
Summary of Contents for VSP001
Page 17: ...Electric Pressure Washer...
