background image

www.heinner.com 

 

 

1340W, 50-60Hz, 220-240V

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

6. Do not use the appliance if the mains cord, the plug or other parts are damaged.

 

7.  If  the  power  cord  of  this  appliance  is  damaged,  it  must  always  be  replaced  by 
manufacture or a service center authorized, in order to avoid hazardous situations.

 

8. Thoroughly clean the parts that will come into contact with food before you use the 
appliance for the first time.

 

9. Unplug the appliance immediately after use.

 

10. Never use your finger or an objection to push ingredients down the feed tube while 
the appliance is running. Only the pusher is to be used for this purpose.

 

11. Keep the appliance out of the reach of children.

 

12. Never let the appliance run unattended.

 

13. Switch the appliance off before detaching and install any accessory.

 

14.  Wait  until  moving  parts  have  stopped  running  before  you  remove  the  parts  of  the 
appliance.

 

15. Never immerse the motor unit in the water or any other liquid, nor rinse it under the 
tap. Use only a moist cloth to clean the motor unit.

 

16. Do not attempt to grind bones, nuts or other hard items.

 

17. Never reach into the cutter housing. Always use the pusher.

 

18. Mincers are fed with sinewless, boneless and fatless beef that has been cut into pieces 
approximately 20 mm x 20 mm x 60 mm. Pushers are pressed with a force of 5N against 
the  meat.  Do  not  use  the  appliance  for  more  than  5  minutes  consecutively.  Leave  the 
appliance to cool for 10 minutes before using again.

 

19. Accessories shall include instructions for their safe use.

 

20. It shall warn of potential injury from misuse.

 

21.  This appliance  is not intended for use  by persons (including children) with reduced 
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they 
have  been  give  supervision  or  instruction  concerning  use  of  the  appliance  by a  person 
responsible for their safety.

 

22. Children should be supervised to ensure that they do not play with the appliance.

 

23. If the appliance is locked, please press Reversal button(REV). The meat locked in cutter 
housing is untrodden, so the appliance can renew its usual condition.

 

24. Disposal of appliances and batteries.

 

25. After the implementation of the European Directive 2002/96/EU in the national legal 
system, the followi ng applies:

 

Electrical  and  electronic  devices  may  not  be  disposed  of  with  domestic  waste. 
Consumers are obliged by law to return electrical and electronic devices at the end of 
their service lives to the public collecting points set up for this purpose or point of sale. 
Details to this are defined by the national law of the respective country. This symbol on 
the product, the instruction manual or the package indicates that a product is subject 
to these regulations. By recycling, reusing the materials or other forms of utilising old 
devices, you are making an important contribution to protecting our environment.

 

Summary of Contents for MG-1340WH












Reviews: