Heinner HWM-V8214D++, Instruction Manual

Page: 35 / 84

www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
34
All repairing operations required for your machine should be carried out by our authorised
service. If your machine requires a repair or if you cannot remove the fault by the help of the
information provided as follows:
•
Unplug your machine.
•
Turn the water faucet off.
FAULT POSSIBLE CAUSE TROUBLESHOOTING
Your machine does not start. It is not plugged. Plug machine in.
Fuses out of order. Replace the fuses.
Electricity cut-off. Check mains power.
Start/Pause button not
pressed.
Press on Start/ Pause button.
Programme dial ‘stop’
position.
Switch the programme button to the
desired position.
The machine door is not
completely closed. Close the machine door.
Your machine does not intake
water. Water tap is turned off. Turn your faucet on.
Water inlet hose may be
twisted. Check water inlet hose and untwist.
Water inlet hose clogged. Clean water inlet hose filters.
Valve inlet filter clogged. Clean the valve inlet filters.
The machine door not
completely closed. Close the machine door.
Your machine does not
discharge water.
Discharging hose
clogged or
twisted.
Check the discharging hose, then
either clean or untwist.
Pump filter
clogged.
Clean the pump filter.
Laundries settled in
the machine non-
homogeneously.
Spread your laundry in the
machine evenly.
XI. TROUBLESHOOTING