Heinner HWM-V6010D++, Manual

Page: 33 / 88

www.heinner.com 6Kg, 220-240V~50Hz, 1000rpm
32
WARNING!
Unplug your machine before starting the maintenance and cleaning of your machine.
Turn the tap water off before starting the maintenance cand cleaning of your machine.
CAUTION: Your machine’s parts might be damaged if cleaners with solvent agents are
used. Do not use cleaning materials with solvent agents.
WATER INLET FILTERS
Filters to avoid dirt and foreign substances in the water from penetrating into the machine
are available both on the side of faucet and on the ends of water valves along the water
inlet hose of your machine.
If your machine cannot intake sufficient amount of water despite water faucet being open,
these filters should be cleaned. (It is recommended that you clean you pump filter one in 2
months)
1. Detach the water inlet hoses.
2. Remove the filters on water inlet valves using pliers and then clean it with a brush
in water.
3. Disassemble the filters on the side of faucet side of water inlet hoses manually and
clean it.
4. Having the filters cleaned, you can fit them in the same way reversely.
CAUTION:
Filters of water inlet valves may be clogged due to contaminated water faucet or lack of
necessary maintenance or valves may be broken down, causing water leaking into your
machine continuously.
The breakdowns that may arise due to these reasons are out of the scope of warranty.
XI. CLEANING AND MAINTENANCE