www.heinner.com 7Kg, 220-240V~50Hz, 1200rpm
6
REMOVING THE TRANSPORTATION SCREWS
1.
Before operating the washing machine, remove the 4 transportation screws from
the back of the machine. If the screws are not removed, it may cause heavy
vibration, noise and product malfunction (voiding the guarantee).
2.
For this reason, transportation safety screws shall be loosened by being rotated
approx. 30 mm following the direction of arrow shown using an appropriate
wrench.
3.
Push two transportation bolts on horizontal direction inward and loose
transportation bolt.
4.
Transportation screws shall be removed by pulling out.
V.
INSTALLATION