•
Push the door of your machine until hearing the
locking sound to close it.
•
Close the door of your machine properly, otherwise
your machine will not start the washing operation.
CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING
(ADDING DETERGENT INTO MACHINE)
The amount of detergent you will put in your machine will depend on the
following criteria:
•
Your detergent utilization will be based on the degree of
contamination of your laundries. Do not prewash your less stained laundries
and put your slight amount of detergent in the 2nd compartment of the
detergent drawer.
•
For your much stained laundries, select a programme
including prewashing, and put ¼ of the detergent you will put in the detergent
drawer in the 1st compartment of the detergent drawer while putting the
remaining ¾ of it into 2nd compartment.
•
Use detergents produced for automatic washing machine in
your machine. The amount of detergent you will use for your laundries is
printed on the detergent package.
•
The higher the degree of hardness of the water the more
detergent you will use.
•
The amount of the detergent you will use will increase as
the amount of your laundries increase.
•
Put the softener in the softener compartment in the detergent
drawer. Do not exceed the MAX level. Otherwise, softener will flow into
washing water through flushing.
•
Softeners with high density are required to be thinned to a degree before being
put in the drawer. Because high-density softener will clog the flush and avoid
the flow of the softener.
•
You can use your liquid detergents in all programs without prewashing. For
this, fit liquid detergent level plate in the accessories bag or the liquid
detergent apparatus (*) into 2nd compartment of the detergent drawer and set
the amount of liquid detergent according to the levels on this plate. Remember
to detach the liquid detergent plate.
(*)Machinery specifications may vary depending on the product purchased.
www.heinner.com
34/74
