Heinner HTCH-F660GBK, Manual

Page: 4 / 33

www.heinner.com 200W, 50Hz, 220-240V
3
IV. TELESCOPIC MODEL INSTALLATION
Way 1
To install onto the wall drill 2 holes of 8 mm on a suitable place according with the
centre distance of hole in the back of the cooker hood.
Insert the nut into the holes.
Insert the screws into the nuts and tight. Put the cooker hood onto the tighten screws.
Fix the cooker hood with safety screw. The two safety vents are position on the back
casing, with diameter of 6mm. Put the one way valve onto the cooker hood.
Way 2
Drill 4 holes of 6mm diameter at the bottom of the hanging cupboard.
Put the one way valve on the cooker hood, then install the cooker hood on the bottom
of the hanging cupboard, tighten the hood with enclosed 4 screws.
Note :
1. The extensible pipe is optional accessory, not supplied.
2. Take off protection film before installation.