www.heinner.com 105W, 50Hz, 220-240V
5
4.
Insert the nut into the holes.
5.
Insert the screws into the nuts and tight.
6.
Hang the cooker hood onto the fixed screws.
7.
Attach the one-way valve onto the cooker hood. Lay the expansion pipe (not
included) on the valve. Lift up the expansion pipe till it out of the wall through the
hole on the wall.
B. Cabinet Mounting
1.
Attach the one-way valve onto the cooker hood.
2.
Drill 6 holes of Ø 4mm at the bottom of the hanging cupboard.
3.
Put the one-way valve on the air outlet of cooker hood, then install the cooker hood
on the bottom of the cupboard, tighten the cooker hood with enclosed M4 screws
and flat washers.
