Heinner HSVC-H18.5GD, Instruction Manual

Page: 27 / 61

www.heinner.com 150 W, 220-240V~, 50/60Hz
VI. USING THE APPLIANCE

If the product in the upright position, please pull the handle backward so that the body
support can leave from the buckle and then it can start to work.

Press the power ON button, then press again, it will become OFF. When it is ON, press
+/- to switch to LOW speed, then press again, it will change to HIGH speed. Each cycle
like this way.

In the status of power on, the brush and LED lighting will work together. Accordingly to
the switching of LOW-HIGH, the brush will rotate at a high speed and low speed, also,
the LED lighting will change between high and low light level.

Push the handle back and forth to move the brush back and forth, twist the handle to
turn the brush left or right to reach every corner of the ground where you need to
clean it.

Press the release button to remove the main body (as below picture), you can use it for
cleaning elsewhere, such as countertops, sofas, seats and other surface cleaning.
ON-OFF
LOW-HIGH
STEP 1
STEP 2