www.heinner.com 200W, 220-240V~50/60Hz
1.
After use, clean each part (except for the main machine).
2.
Before cleaning, unplug wires and fully cool off main machine.
3.
After juicing, remove all parts as per the reverse procedure.
4.
After cleaning, dry the product with a cloth, install and store it in a dry and safe place.
5.
Before flushing the outlet of feed cylinder, pull out the bottom silicon sheet and, after
cleaning, install silicon sheet correctly.
VI. CLEANING AND MAINTENANCE
6. If juice cup is filled or juicing is finished, turn switch to "0" position and when spiral
feeding rod stops rotation, empty juice cup, clean feed cylinder and screener. Juicing
period should not exceed 20 minutes, and, after 2-3 cycles, the product should be cooled
down before next cycle.
Note:
Before juice cup is filled, stop operation. Do not put too much fruits and vegetables.
Empty the juice cup and food residue before next cycle.
7. If too much foods are found in the product, press down REV, and rotor will reverse
exit materials, then turn switch to "0" position to start juicing.
8. After use, turn switch to "0" position, unplug wires, clean each part (except for the main
machine), dry it and assemble them, store in a safe place.
