Heinner HSJ-160RD, Manual

Page: 33 / 67

www.heinner.com 150W, 50/60Hz, 220-240V
32
Soak the ingredients in water before extracting if the ingredients are dry or
no fresh.
-When extracting ingredients like carrots or beets, extract with a
combination of other fruit and vegetables with more water content to
increase the juice yield.
Cut ingredients to 4-5 inches long and 1 in wide for optimal extraction.
-Check that the compression silicone is assembled properly in the unit.
When extracting seeded fruits like tomatoes, the strainer may go clogged
with the excessive amount of small seeds. Pour water through the hopper
to unclog before continuing extraction.
Juicing bowl shakes
in the middle of
operation -It is normal for the juicing bowl to shake a little bit during operation.
Seems like juicing
screw is grinds -The juicing screw and e strainer are closely aligned with small tolerances.
Do not operate without inputting any ingredients for more than 30
seconds
Juicer is noisy -The rotation wiper may make a squeaking noise while wiping the juicing
bowl. After inserting ingredients the noise should disappear.
-Turn the switch to OFF position and unplug the power cord from the wall
outlet.
-Check the parts are assembled properly
-Check that the juicer is on a level surface.
-Check that the ingredients are cut to appropriate size.
I see a separation
in
the juice
extracted
-There maybe a separation in the juice due to the ingredients’ density after
extraction. This is different from oxidation that is caused by juicing with a
traditional high speed juicer.
The juice leaks out
of top set
-The juice may leak if the compression silicone is not assembled properly.
Disassemble and ensure the compression silicone is assembled properly.
I see discoloration
of the plastic parts -After use, clean the juicer immediately to prevent discoloration.
-Beta carotene (found in carrots and spinach) pigment may discolor the
plastic parts of the juicer. Rub the parts with a little bit of cooking oil then
clean with a mild soup.
-The silicone parts can be removed and cleaned separately.