Heinner HSI-2400LGR, Instruction Manual, Page: 12 / 25

www.heinner.com 2400W, 50-60Hz, 220-240V
V. USING INSTRUCTIONS
Characteristics and structure:
The product has many functions such as temperature regulating, spraying, dry ironing,
steam etc. And it comes with the following characteristics: luxury shape, high heat
efficiency, easy using, good ironing result, work and time saving and so on.
Filling water:
1. Before filling water, please pull out the plug first.
2. Set the steam control to the minimum position.
Pull down the cover of water filling mouth, then fill water.
Spraying:
Press the spraying button, steam will be sprayed out from the spraying nozzle. At that
time, you should keep enough water in the water tank.
Steam ironing:
1. Use steam ironing, turn the steam control to minimum position and set the
temperature control at the “…” or MAX position.
2. After the indicator stop flashing, turn the steam control to the suitable position,
steam will be sprayed, ironing can start.
Bursting steam:
Set the temperature control at the “…” or MAX position, then press down the bursting
steam button, the base plate will spray out bursting steam.
Dry ironing:
Turn the steam control to minimum position, set the temperature control to the
suitable position, you can dry ironing.
Self cleaning:
First fill water, then Plug the iron into the mains, set the temperature control to the
maximum position, about 3 minute later, press the self clean button for about 1
minute, strong steam and hot water will be sprayed to clean the steam chamber. Use
the function once every two weeks
Anti-drip:
This iron is equipped with a drip stop function: the iron automatically stops steaming
when the temperature is too low to prevent water from dripping out of the soleplate.
Anti-calc:
The Anti-calc function filtrate the minerals from the water to prevent mineral residue
build up at the steam chamber.
Automatic shut off:
If the iron is switched on and not moved for a period of 8 minutes while standing on
its heel or 30 seconds while standing on the soleplate, an internal safety feature will
switch the iron off and the auto-shutoff indicator will blink. Move the appliance
shaprly to switch it on again.