Heinner HPAC-09WH, Manual

Page: 22 / 108

www.heinner.com 9000 BTU, 220-240V~50Hz
21
WAIT 3 MINUTES BEFORE RESUMING OPERATION
•
After the unit has stopped, it can not be restarted operation in the first 3 minutes.
This is to protect the unit. Operation will automatically start after 3 minutes.
POWER MANAGEMENT feature
•
Under cooling operation, when the ambient temperature is lower than the setting
temperature for a period of time, the unit will be automatically operate power
management feature. The compressor and fan motor stop. When the ambient
temperature is higher than the setting temperature, the unit will be automatically
quit the power management feature. The compressor and (or) fan motor run.
WATER DRAINAGE
•
During dehumidifying modes, remove the drain plug from the back of the unit,
install the drain connector (5/8" universal female mender) with 3/4" hose (locally
purchased). For the models without drain connector, just attach the drain hose to
the hole. Place the open end of the hose directly over the drain area in your
basement floor.
NOTE: Make sure the hose is secure so there are no leaks. Direct the hose toward the
drain, making sure that there are no kinks that will stop the water flowing. Place the end
of the hose into the drain and make sure the end of the hose is down to let the water flow
smoothly. When the continuous drain hose is not used, ensure that the drain plug and
knob are installed firmly to prevent leakage.
Remove the
drain plug
Continuous drain
hose