www.heinner.com 2000W, 220-240V~50/60Hz
When symbol
is used, it means “Caution: Hot surface”.
Before using the appliance for the first time:
Clean the plates using a damp sponge rinse and dry carefully.
After applying a fine coating oil to the plates, close the appliance and plug it in. The
indicator light (red) will come on. Turn the knob to the right and the green light is on.
Allow it to heat up for several minutes to get rid of the new smell.
TO USE
CAUTION: Do not use this product to cook or defrost frozen food.
NOTE: During the initial uses of this product, it may produce some smoke. This is normal
and will subside with further use.
Before using this product for the first time, clean it as described in the "Care and
Maintenance” section.
Open the unit by pulling the Handle up.
Close the Plates and turn the unit on by plugging it into a standard electrical outlet.
Verify that the Power Indicator Light illuminates in RED. Turn the knob to the right, the
green light is on, and start heating.
WARNING: The Cooking Plates and metal surfaces of the unit will become extremely hot
when in use. To avoid a burn hazard, wear heat resistant mitts or gloves and touch only
the Metal portion of the Handle.
After the unit preheats for approximately five minutes, the green lights go out.
the Ready Indicator Light will illuminate in RED, indicating the product is ready for use.
Use the Handle to lift the Upper Plate. Place food on the Lower Plate using wooden or
plastic heat-resistant utensils. Press the red button on the lower right corner, hold the
handle backward and push the upper baking tray to the bottom of the baking pan.
CAUTION: Do not use metal utensils on this product, as they will scratch and damage the
Plates non-stick coating. Use the Handle to lower and rest the Upper Plate on top of the
food.
NOTES:
1.The cooking time for different foods depends on the type and thickness of the foods.
2. Foods should be cooked thoroughly before consumption.
When the food is cooked as desired, lift the Handle to open the Plates, then remove the
food using the utensils. If more cooking will be done at this time, close the Plates to
conserve heat.
Repeat Steps 5-6 until all cooking is complete.
Turn off the product by unplugging the Power Cord from the electrical outlet. When the
unit has completely cooled, clean and dry it.
IV. USING THE APPLIANCE
