www.heinner.com 1300W, 50-60Hz, 220-240V
50
Note:
Maintaining the cleanness of the appliance can improve the coffee quality, and
prolong the appliance’s life-span. It must be noted that all of the components shall not
be cleaned in the dishwasher. After cleaning, wipe them or wait for them to dry, never
dry in/ over the toaster or in the microwave oven.
4.
The daily maintenance of full assembly
：
Make sure the power outlet is
unplugged before cleaning and maintenance, never use cleanser for wiping
outside surface of coffee machine.
5.
Never immerse the appliance in water or any other liquid.
6.
The daily cleaning of water tank
：
The cleaning grade of water tank is the most
important factor for coffee quality. Then maintain the cleaning of water tank is
the most important condition which assures the high quality of coffee.
Remove the water tank from the coffee machine and clean it with water.
7.
Clean the bean box
：
According to your desire or when you need change the coffee beans, you need clean
the bean box. Open the bean box cover, remove the coffee beans with hand or other
tool, it must be noted a little beans will deposit under the box cover, never remove
them with hand.
8.
Clean the brewer
：
The coffee machine is equipped with a detachable brewer,
to ensure the offee quality and the stability of running, please cleaning the
brewer daily. Rinse the brewer in the water for cleaning. Never use cleanser
and disinfector for cleaning. Wipe the brewer with dry cloth, then assemble it
into the coffee machine. The filtrating sheet in the brew group assembly shall
be disassembled for cleaning if you do not want to use for a long time,
9.
When disassembled, you shall use the attached rotating handle
（
see
Fig.13-Fig.17).
10.
When disassemble and assemble the brewer, if it is blocked, please contact
with our authorized service facility for repairing.
11.
Never clean the brewer with cleanser and disinfector.
12.
Never dry the brewer with hair drier or other electrical heating appliance.
13.
Clean the dregs box: when the LCD prompts clean the dregs box, you shall
open the side door and empty the dregs box, otherwise the appliance will not
operate.
14.
Empty the drip tray: there is a red object in the drip tray, it is buoy, it will sense
the water level automatically. Once the buoy is fully exposed, it prompts you
shall empty the drip tray, after empty, assemble it into the appliance again.
15.
The attached accessory bag include four sealing rings, they are parts which is
easy to damage and standby parts (see Fig.18), two for the brewer assembly
(see Fig.19), and the other two for the brew mouth (see Fig.20). Any of sealing
rings on the brewer assembly or brew mouth is missed or damaged, you must
replace it with corresponding sealing ring, the coffee machine will continue to
work.