Heinner HEM-1140SS, Instruction Manual, Page: 23 / 54

www.heinner.com 1140W, 50Hz, 220-240V
22

FROTHING MILK/PRODUCING STEAM TO HEAT LIQUIDS
The steam wand can be used to froth milk and make hot beverages like drinking chocolate,
water or tea.
Method:
1. Remove the removable tank and fill it with desired water, the water level should not
exceed the “MAX” mark in the tank. Then insert the tank into the appliance properly.
2. Then connect the appliance to power supply. Press the power switch to the lower
position, the power indicator will illuminate.
3. Press the coffee/steam switch to higher position which is the “
”
position, waiting for
until the ready indicator is illuminated.
4. Dip the steam wand without froth device sleeve into the liquid to be heated or the
intended froth milk. Turn the operation knob to the “ ” position.
5. When the required temperature is reached, you can turn the operation knob to the “O”
position.
6. Press the power switch for 3s to cut off the power source.
AUTOMATICALLY POWER-OFF FUNCTION
4.
After pressing power switch, if there is no any operation within 25 minutes, the unit will
power off automatically.
5. After pressing power switch, if there is no any operation after pump worked for 3
minutes during brewing coffee, the unit will power off automatically.
6. After pressing power switch, press down the coffee/steam switch, after indicator become
green, turn the operation knob to “
”
position, the unit will power off automatically
within 25 minutes.