23
FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE
ERROR
CODE
ERROR
DESCRIPTION
CONTROL
F5
Inadequate water
supply
•
Make sure the water input tap is totally open and that there is
no water cut.
•
Close the water input tap, separate the water input hose from
the tap and clean the filter at the connection end of the hose.
•
Restart your machine, contact the service if the error resumes.
F3
Error of continuous
water input
•
Close the tap.
•
Contact service.
F2
The waste water in
the machine cannot
be discharged.
•
Water discharge hose is clogged.
•
The filters of your machine might be clogged.
•
Power off-on your machine and activate the program
cancellation command.
•
If the error continues, contact the service.
F8
Heater error
•
Contact service.
F1
Alarm is active against
water overflow
•
Power off your machine and close the tap.
•
Contact service.
FE
Faulty electronic card
•
Contact service.
F7
Overheating error
(temperature in
the machine is
too high)
•
Contact service.
F9
Divisor position error
•
Contact service.
F6
Faulty heater sensor
•
Contact service.
VIII.
TROUBLESHOOTING
Summary of Contents for HDW-FS6006DGE++
Page 60: ...www heinner com 59...
