Heinner HCH-L1500WH, Instruction Manual

Page: 12 / 29

www.heinner.com 750W/1500W, 220-240V~50Hz
CONTROL PANEL
SYMBOL FUNCTION
“o” OFF
“
Ⅰ
” Low setting with warm wind
“
Ⅱ
” High setting with hot wind
“
Ⅰ
” Warm wind with Oscillation
“
Ⅱ
” Hot wind with Oscillation
INSTRUCTION FOR USE
To use the machine for heating:

Plug the heater into a suitable power outlet, observing all the instruction regarding
positioning.

Turn the Knob to “
Ⅰ
” setting and it will blow the warm wind.

Turn the Knob to “
Ⅱ
” setting and it will blow the hot wind.

Turn the Knob to “
Ⅰ
” setting and it will blow the warm wind with oscillation.

Turn the Knob to “
Ⅱ
” setting and it will blow the hot wind with oscillation.
OVERHEATING

The thermostat will turn the machine off it overheats.

Overheating can be caused by obstruction to the air intakes on the back of the
machine or the grill on the front .If this occurs please disconnect the machine and
allow it to cool for 30 minutes. Remove any obstruction and turn the machine back
on.
SAFETY TIP-OVER SWITCH:

The appliance is fitted with a tip-over switch. When you use the appliance in an
upright position on a flat and stable surface, the tip-over switch will be on. In the
event the heater is knocked over, the heater will stop functioning automatically.
IV. USING THE APPLIANCE