Heinner HCF-M362CA+, Manual

Page: 14 / 71

www.heinner.com
13
➢
Cleaning
1. Dusts behind the freezer and on the ground shall be timely cleaned to improve the
cooling effect and energy saving. The interior of the freezer should be cleaned regularly
to avoid odor. Check the door gasket regularly to make sure there are no debris. Clean
the door gasket with mild soap and water. Please turn off the power before cleaning,
remove all food, shelves, drawers, etc. Soft towels or sponge dipped in a solution made
of two tablespoons of baking soda and a quart of warm water and non-corrosive neutral
detergents are suggested for cleaning. The freezer of shall be finally cleaned with clean
water and dry cloth. Open the door for natural drying before the power is turned on.
2. For areas that are difficult to clean in the refrigerator (such as narrow gaps or
corners), it is recommended to wipe them regularly with a soft rag, soft brush, etc. and
when necessary, combined with some auxiliary tools (such as thin sticks) to ensure no
contaminant accumulation in these areas.
3. Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause
odors in the interior of the refrigerator
4. Do not use hard brushes, clean steel balls, wire brushes, abrasives, such as
toothpastes, organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water,
acid or alkaline items clean refrigerator considering that this may damage the fridge
surface and interior.
4. Do not rinse with water so as not to affect the electrical insulation properties. Please
use a dry cloth when cleaning temperature control knob and electrical components.
Please unplug the freezer for defrost and cleaning.
➢
Defrost
1. Freezer shall be manually defrosted.
Unplug the freezer and open the freezer door, remove foods and drawers before
defrosting; Open the outflow holes and drainage holes (and place water container at
the outflow holes); indoor frost will naturally melt, wipe the defrost water with a dry,
soft cloth. When the frost softens, an ice scraper might be used to accelerate de-icing
process.
2. Please remove the food and put in a cool place when defrosting before removing
accessories.
Other mechanical devices or other means shall not be used to accelerate except those
recommended by the manufacturer. Do not damage the refrigerant circuit.
VI. CLEANING AND MAINTENANCE