Heinner HCF-400M, Manual

Page: 5 / 53

www.heinner.com
4
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with
warm water using a 'Wrung-out' sponge or cloth. Wash the shelves and salad bin in
warm soapy water and dry completely before replacing in the unit. Clean the exterior of
the unit with a damp cloth.
If you require more information refer to the Cleaning section.
Before Using Your Unit
• Remove the exterior and interior packing.
• Check to be sure you have all of the following parts:
1 Storage Baskets
1 Instruction Manual
1 Plastic Scraper (optional)
• Before connecting the freezer to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.
◆
Before Plugging in
You must check that you have a socket which is compatible with the plug
supplied with the unit.
◆
Before Turning On!
Do not turn on until two hours after moving the unit.
Temperature Control
• Your freezer has one control for regulating the temperature. The temperature
control is located on the lower right hand corner.
•
The range of the temperature control is from position" 1" the warmest to "6" the
coldest. Adjust the temperature control to the setting that best suits your needs. The
setting of “4” should be appropriate for home or office freezer use.
•
To turn the freezer off, turn the temperature control to "OFF".
Moving Your Freezer
• Remove all the food.
• Securely tape down all loose items inside your freezer.
• Remove the rollers to prevent damage.
• Tape the doors shut.
• Be sure the freezer stays in the upright position during transportation.
V. USING INSTRUCTIONS