Heinner HCF-205NHSA+, Manual

Page: 30 / 75

www.heinner.com
29
Temperature setting
Electrical connection
When the appliance is plugged in, all LED indicator lights will flash once. Then the
appliance will resume the mode previously set before the electrical outage.
Temperature Setting
•
Setting: Press
“
SET
”
button, enter the temperature setting mode. The
temperature indicator bar of temperature goes up a scale by each press. This
setting runs in cycles. Temperature can run from Scale MIN to Scale MAX. Scale
MAX is the coldest. The temperature is automatically set in 5 seconds after last
press.
•
Super Freezing
•
Press
“
SET
”
button consecutively to enter
“
SUPER
”
freezing mode from Scale
MAX, the indicator bar on the left hereby will turn dark whereas the indicator
light of
“SUPER” turns on. This mode is automatically set in 5 seconds after last
press.
•
The compressor keeps working in
“
SUPER
”
freezing mode.
•
If the
“
SUPER
”
mode keeps running for 52 hours and not stopped manually, the
system will automatically cut out this mode, with the temperature back at Scale
5.
Power On & Power Off
If the appliance is working, press “ON/OFF” for 3 seconds to turn off.
If the appliance is off, press “ON/OFF” for 3 seconds to turn on.
Indicator Lights
•
Temperature Indicator Light (Bright Blue): To adjust the temperature from Scale
MIN to Scale MAX.
•
MAX is the coldest.
•
Super Freezing Indicator Light (Bright Blue): Light on = in
“
SUPER
”
mode; light
off = exit “SUPER” mode.
•
Running Indicator Light (Bright Green): Light on = compressor in work; light off =
compressor stops.
•
30 minutes after the last operation, the indicator light will be on in half
luminance.