1. Operation board
2. Air out grill
3. Base
4. ON/OFF switch
5. 1000W setting
6. 1000W setting
7. Oscillation switch
TECHNICAL SPECIFICATIONS:
Model
HCEH-220
Voltage/Frequency
220-240V~ 50/60Hz
Power
1000 / 2000 W
IP Code
IP20
Protection Class
II
Noise level
<60dB
OPERATION:
1. Plug the power cord into a standard 220-240V AC electrical outlet.
2. Press the
“ON/OFF” switch on the top, then the heater will be connected to electricity
3. Press the button marked
“ 1000W” to choose the power, when press one, the power is 1000W,
when press down both two switch, the power is 2000W
4. When press down the oscillating button, the heater will turn automatically.
TIP OVER FUNCTION
This heater has with tip over switch function, when the heater falls off, then the power will be
shut off automatically.
OVERHEAT SAFETY DEVICE:
The heater is fitted with a safety device to switch off the heater in the event of overheating. If
the safety device operated, please turn the heater off and disconnect the appliance and let it
completely cool, inspect for blockage of air inlet or outlet. Wait at least 5 minutes to let the
protection system reset before restarting the heater. If the heater fails to operate or the safety
device switches the heater off again, return heater to your nearest service center for examination
or repair.
MAINTENANCE AND STORING:
1. Always be sure that the appliance is switched OFF before cleaning or attempting to store
the item. Do not immerse heater in water or allow water to drip into the interior of the heater, as
this could create an electric shock hazard.
2. Allow the product to completely cool before handling or cleaning it.
Ensure the heat select knob is in the shut down position and the power cord is unplugged from
the electrical outlet before cleaning the product.
