16
X. TEMPERATURE SETTING
Insert the plug of the connection lead into the plug socket with protective earth contact.
When the refrigerator compartment door is opened, the internal lighting is switched on. After
the fridge has been placed in position, wait for 5 minutes before electricity is supplied. Don’t
store anything until the temperature inside the fridge becomes low enough.
The temperature selector knob is located on the top of the refrigerator compartment.
Setting 0 means:
Off. Clockwise rotate the knob to turn on the appliance.
Setting 1 means:
Highest temperature, warmest setting.
Setting 7 (end-stop) means:
Lowest temperature, coldest setting.
Important!
Normally we advise you select setting of 2 or 3 or 4, if you want the temperature
higher or colder please turn the knob to warmer or colder setting accordingly. When you turn
the knob to colder which can lead to the more energy efficiency-Otherwise, it would result
the energy-consuming.
Important!
High ambient temperatures (e.g. on hot summer days) and a cold setting (position
6 to 7) may cause the compressor to run continuously or even non-stop!
Reason:
when the ambient temperature is high, the compressor must run continuously to
maintain the low temperature in the appliance.
NOTE:
High temperature setting will acceler ate food waste.
For optimum food preservation, a medium setting is generally the most suitable.
Changing the light bulb
Warning!
If the light bulb is damaged. Do not change it by the user!
Changing the light bulb carry out by inexperienced persons may cause injury or serious
malfunctioning. It must be replaced by a qualified person in order to avoid a hazard. Contact
an authorized service for help.
•
Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse
or the circuit breaker.
•
Light bulb data: 220-240 V, LED MAX.1.5W.
•
To switch off the appliance, set the tem
perature regulator to position “0”
•
Unplug the mains plug
