Heinner HBFS-150-TSSL, Instruction Manual

Page: 12 / 24

www.heinner.com 4x AAA 1.5V, 150Kg
11
1.
● Find the 2X3V CR2032 batteries in the packet and the battery holder at the
back of the scale, open the cover, install the batteries into the holder and
cover it back(make sure the positive pole of the batteries are upwards).
2.
Place the scale on hard and flat surface. Clean floor is best.
3. Tap or knock the scale gently and it will get ready for use when the LCD screen
shows “0.0kg” after flashing “8888”, and you can press the key at the bottom
side to switch different units (kg/lb/st lb).
4. Step on the scale gently, position your feet evenly near the center and keep
your body still and straight until the scale stabilizes your weight. The scale will
be auto off within seconds if no further using.
For weight, body fat, hydration muscle, bone, BMI and Calorie percentage:

Press “SET” key for seconds to set your personal data. Press“
▲
”or “
▼
” key to
select a number from 0 to 9 as your personal code when the code number flashes
on the screen and once you reach your target number, please press “SET” to
confirm
.