Heinner HB-1000XBK, Manual

Page: 20 / 44

www.heinner.com 1000W, 50/60Hz, 220-240V
19
4. Attach the lid onto the chopper bowl, make sure the tuber on the inside wall of bowl
aligns with the groove of lid, then put down the lid and turn it in clockwise direction
until it locks into position. (See Fig.2) To detach the lid, turn in adverse direction.
5. Insert the motor unit into the hole of the chopper lid and turn in clockwise direction
to lock (see Fig.3).
6. Plug the appliance to power outlet. Then press and hold the low speed button to
start operating. At the same time, you can select desired speed setting by dialing the
speed control dial, the speed will be higher gradually when you dial the speed control
dial from left to right.
7. You also can start operating by pressing and hold the high-speed button (turbo
button), the appliance will operate at the highest speed all the time. The speed will not
change even if you dial the speed control dial.
8. To stop the appliance by releasing the low speed button or high-speed button of the
motor unit.
9. After finishing chopping, unplug the power outlet firstly, then remove the motor unit
from the chopper lid by turning it in anti-clockwise.
10. Open the chopper lid by turning it in anti-clockwise and remove the chopped food.
Caution:
- To reduce the risk of injury, never place cutting blade on base without first putting
bowl properly in place.
- Be sure chopper lid is securely locked in place before operating appliance.
- After chopping, for safety, you shall disassemble the motor unit from the chopper lid
firstly, then remove the chopper lid. Never remove the chopper lid with the motor unit
in place.
Lock Lock
Fig. 1 Fig. 2
Fig. 3