Heinner HAC-18INVB, User Manual

Page: 26 / 90

www.heinner.com 220-240V ~ 50Hz
25
V. USING INSTRUCTIONS
SPECIAL FUNCTIONS
Refrigerant Leakage Detection
With this new technology, the display area will appear EC or the indication lamps will
continue flashing when the outdoor unit detects refrigerant leakage.
Louver Angle Memory Function(optional):
Within the scope of safety angle, it will memorize the open angle of horizontal
louver. If it exceeds, it will memorize the boundry of safety angle. In the following
circumstances, it will return to standard angle: 1) pressing the manual switch,
2)unplug and then plug in the machine. So we strongly suggest that the open angle
of the horizontal louver should not be set too small, in case the condensed water
forms and drops from the horizontal louver.
SELF CLEAN function(Optional)
• Function used after the Shut Down of cooling operation to clean the Evaporator
and keep it as fresh for the next operation.
•
The unit will operate as following sequence : FAN ONLY mode at Low fan
speed--Heating operation with LOW fan speed(applicable to cooling & heating
modles only) ---FAN ONLY operation--Stop Operation---Turn off.
Note :
• This function is only available under COOL(AUTO COOL, FORCED COOL) and DRY
mode.
•
Before select the function, it is recommended to run the air conditioner under
Cooling operation for about half an hour. Once the Self Clean function is activated, all
TIMER setting will be cancelled.
•
During Self Clean operation, when press the SELF CLEAN button on the remote
controller again will stop the operation and turn off the unit automatically.