www.heinner.com 35W, 50Hz, 220-240V
27
Notes: please confirm the following contents before the entrusted maintenance
Faults
Troubleshooting
Error E1
Disassembly protection tips; please assemble the air inlet grills and air
outlet grills properly.
Error E0
Hardware faults; Please contact the after-sales office.
Error Eu
Sensor faults; Please contact the after-sales office.
Error E3
The speed is beyond control; Please contact the after-sales office.
The purifier is not
working
Firstly, check whether the power cord is plugged into the power socket;
the loose plug caused by the movement of the purifier may affect the
energizing; Secondly, check whether the air inlet grill and air outlet grill of
the purifier are assembled properly. This appliance is provided with a
disassembly protection function. If the air inlet grill and air outlet grill are
not assembled properly, the product cannot work
The purifier has a
small amount of air
and is noisy
Firstly, check whether the foreign bodies block the air inlet grill and air
outlet grill; if any, remove those foreign bodies; Then, check whether the
Pre-Filter becomes dirty or reaches the end of its service life; if any, clean
the Pre-Filter; Finally, check whether the HEPA filter is full of dust or
reaches the end of its service life; if any, the replacement of the HEPA filter
is required.
The air outlet smells
odor
When the appliance is operated for the first time, it smells slightly plastic,
which is normal; If this appliance works in places (like smoking area or
rotisserie, etc.) with strong smell for a long time, you need to change the
filter element frequently and reset it. Check whether the air inlet/outlet
grill and Pre-Filter are full of dust or dirt; if any, maintain the appliance and
clean the dust and dirt on the air inlet/outlet grill and Pre-Filter.
Whether the wheels
are pulled out after
inserted
Yes, tilt the machine at a small angle and pull them out with a little effort.
If not, try to pull the wheels out while rotating them.
Whether the purifier
can be used with the
humidifier
The wet environment has a greater impact on the filter element and the
mist produced by the ultrasonic humidifier may cause abnormality in the
PM2.5 detection of this appliance, so that simultaneous operation is
avoided as much as possible.
IX. TROUBLESHOOTING
Summary of Contents for ForestBreeze Sense 500
