Heiniger Saphir series, Instruction Manual

Page: 32 / 180

16 Instruction Manual / Small animal clipper
Pos. No. Indication Quantity
Clipper
Charger unit
1 Motor housing upper, incl. switch lever 1
2 Motor housing lower, incl. pins 1
3 Battery Li-Ion 1
4 Motor complete 1
5 Electronics for clipper 1
6 Rubber tap 1
7 Turning lever 1
8 Seal 1
9 Circlip Ø3,2 1
10 Washer Ø4x0,5 1
11 Eccentric cogwheel, pre-assembled 1
12 Cylinder pin Ø4x31,5 1
13 Cylinder pin Ø5h6x18 1
14 PT-screw Kombitorx KA30x16 12
15 Blade support 1
16 Blade interlock 1
17 PT-screw Kombitorx KA30x8 1
18 Clipping pressure spring 1
19 Blade guidance 1
20 Clamp holder 1
21 Top blade opt.
22 Bottom blade opt.
23 Screw M3,5x4 2
24 Upper housing to charger unit 1
25 Power adapter with charging electronics 1
26 Baseplate to charger unit 1
27 Rubber foot 4
8 Spare parts
See illustration spare parts at the end of this instruction manual.
WARNING!
Faulty spare parts may cause damages, malfunctions or total loss and may reduce
security. Therefore:
• Only use original spare parts of the manufacturer. Purchase the spare parts at the
oficial distributor or directly at the manufacturer.
• If using no original spare parts all warranty and service claims are expiring.