4
OPERATING INSTRUCTIONS
SEAT BACK INCLINATION ADJUSTMENT
A
This picture shows the position of the
control shaft for seat back angle adjust-
ment. In normal situations, it is located at
the level as the picture indicates.
B
Pull the control shaft outward to release
the seat back.
C
Change the seat back angle by leaning
back to the desired position. Push the
control shaft back in to lock the seat back
in this position.
D
This picture shows the locked position
after seat back angle adjustment.
A
This picture shows the position of the seat
up/down control shaft. It is the same con-
trol shaft that adjusts the seat back angle.
B
Raise the seat by rotating the control shaft
clockwise upward without any body weight
on the seat. The seat will not raise if there
is body weight on it.
C
Lower the seat by rotating the control
shaft clockwise upward while seated.
Release the control shaft when the desired
position is achieved.
A B
C
A B
C D
