2
•
Read,
understand and follow all printed materials provided with and on this wheel dolly.
•
Do Not exceed rated capacity.
•
Before
positioning wheel dolly,
ensure
that the vehicle is securely positioned and
supported by a pair of appropriately rated jack stands.
•
Use only on smooth, hard and level surfaces capable of sustaining the load.
•
Chock
each unlifted wheel assembly in both directions.
•
Be alert
and
sober
when using this product!
Never
operate this equipment when under
the influence of drugs or alcohol.
•
Before moving, lower the load to the lowest possible point and assure that the load is
centered and secured with a load restraint device.
•
Only attachments and/or adapters supplied by the manufacturer shall be used.
•
No alterations shall be made to this product.
•
Never use hydraulic power unit (jack) as a stand alone device.
•
Apply load as close to the vertical position of the lifting member as possible.
WARNING
!
Model
Capacity
Lift Range
Lifting Arm
Length
Lifting Arm
Spread
Overall Size
(L x W x H)
HW93765
3/4 ton
4" - 9"
23"
24"
36" x 35-1/2" x 31-1/2"
SPECIFICATIONS
!
NEVER load this device with more than the weight of the wheel assembly to be removed!
ENSURE that the vehicle is securely positioned and supported by a pair of appropriately rated jack stands.
NEVER use a wheel dolly as a wheel pulling device. Before transporting wheel assembly ensure that it is
free from the hub or drum assembly and that it is secured to the wheel dolly using the provided securing
means.
!
PRODUCT DESCRIPTION
Hein-Werner hydraulic wheel dolly is designed to facilitate the removal and installation of pneumatic tires and wheel
assemblies found on many trucks, buses and trailers. This is
NOT
suitable for use as a wheel and tire puller. It is de-
signed
ONLY
for use in removing up to rated capacity tire and wheel assemblies which are
not
bound and/or seized up
at the brake drum or hub assemblies. This device is designed to be used in conjunction with jacks and jack stands.
Inspect before each use
. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any
wheel dolly that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service
immediately and the manufacturer notified. If you suspect that the product was subjected to a shock load (a load dropped
suddenly, unexpectedly upon it), immediately discontinue use until it has been checked by a factory authorized service
center (contact distributor or manufacturer for list of Authorized Service Centers). It is recommended that an annual
inspection be done by qualified personnel. Replace worn or damaged parts with Hein-Werner Authorized Replacement
Parts only. Labels and owner’s manuals are available from manufacturer.
SAFETY and GENERAL INFORMATION
Save these instructions
. For your safety, read, understand, and follow the information provided with and on this wheel
dolly before using. The owner and/or operator of this equipment shall have an understanding of this equipment and
safe operating procedures before attempting to use. The owner and/or operator shall be aware that use and repair
of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the
operator's native language before use of this product is authorized. If any doubt exists as to the safe and proper use of
this wheel dolly, remove from service immediately.
To avoid crushing and related injuries and or property damage:
