2
SAFETY AND GENERAL INFORMATION
Save these instructions.
For your safety
read, understand, and follow
the information provided with and on this pair
of jack stands before using. The owner and operator of this equipment shall have an understanding of the jack stands
and safe operating procedures before attempting to use. The owner and operator shall be aware that use of this product
may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native
language before use of these jack stands is authorized. If any doubt exists as to the safe and proper use of these jack
stands, remove from service immediately.
Inspect before each use.
Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any
jack stand that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service
immediately. If you suspect that the jack stand was subjected to a shock load (a load dropped suddenly, unexpectedly
upon it), immediately discontinue use until the stand has been checked by a factory authorized service center (contact
distributor or manufacturer for list of Authorized Service Centers). It is recommended that an annual inspection be done
by qualified personnel. Labels and owner’s manuals are available from manufacturer.
PRODUCT DESCRIPTION
Hein-Werner Jack Stands are designed to support rated capacity, partial vehicle loads consisting of one end of a vehicle.
Use as a matched pair to support one end of a vehicle only.
WARNING:
Do not
use automotive jack stands to support
both ends or one side
of a vehicle. Use only
one (1)
pair per
vehicle. Rated capacity is
per pair
only.
SPECIFICATIONS
Model
Capacity per Pair
Base Size
Min. Height
Max. Height
HW93503
3 Ton
9" x 7-1/2"
12"
19"
HW93506
6 Ton
12-7/8" x 10-1/2"
16-3/8"
25-3/8"
Figure 1 - Jack Stand Components
!
Ratchet Teeth
Locking Pawl
Saddle
Ratchet Bar
Locking Handle
Hole for Cotter Pin
Base Frame
