SAFETY AND GENERAL INFORMATION
Save these instructions.
For your safety, read and understand the information contained within. The owner and
operator shall have an understanding of this product and safe operating procedures before attempting to use this
product. Instructions and safety information shall be conveyed in operator’s native language before use of this
product is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with
the use and misuse of this product. If any doubt exists as to the safe and proper use of the product as outlined in
this manual, remove from service immediately.
Inspect before each use.
Do not use if broken, bent, cracked or otherwise damaged parts are noted. If any
component of this product has been or suspected to have been subjected to a shock load (a load applied suddenly,
unexpectedly upon it), discontinue use until checked out by qualified personnel such as an
Authorized Service Center.
Owners and operators of this equipment shall be aware that the use and subsequent repair of this equipment may
require special training and knowledge. It is recommended that an annual inspection be done by qualified personnel
and that any missing or damaged parts, decals, warning/safety labels or signs be replaced with factory authorized
replacement parts only. Any component of this Equipment that appears to be damaged in any way, is worn or operates
abnormally shall be removed from service immediately until such time as it can be repaired/replaced. Labels and
Instruction Manuals are available from manufacturer.
PRODUCT DESCRIPTION
Hein-Werner
Shop presses are designed for automotive, truck, implement, fleet, and industrial repair shops where
pressing, bending, straightening, forming is required. Each press includes a cylinder and a pump. A winch assembly
provides a safe and efficient way to raise and lower the bed frame, and a pressure gauge which provides for monitoring
the applied press force. Typical applications include installation and removal of alternator and power steering pump
bearings, axle bearings, transmission bearings, seal, driveshaft bearings and u-joints and others.
WARNING:
Wear personal protective gear when operating this equipment.
WARNING:
Avoid damaging hydraulic hose. Do not allow hose to kink, twist, curl, crush, cut or bend so tightly
that fluid flow within the hose is blocked or reduced. Periodically inspect the hose for wear. To reduce the risk
of personal injury and/or property damage, ensure rated working pressure of each pressurized attachment is
equal to or greater than rated working pressure of pump.
2
• Study, understand, and follow all instructions before operating the device.
• Do not exceed rated capacity.
• Prior to use, make sure press is securely anchored.
• The press shall be installed and operated in accordance with federal (OSHA), state and local safety standards.
• Operators and observers shall wear eye protection that meets ANSI Z87.1 and OSHA standards.
• Keep hands, arms, feet and legs out of the work area. Accidental slippage can result in personal injury.
• Use appropriate guarding to contain any pieces that may break or fly apart when applying force.
• Use only press accessories having a capacity rating equal to or greater than the capacity of the press.
• Verify lift cables are slack before pressing on the bolster.
• Avoid off-center loads.
• No alterations shall be made to the product.
• Failure to heed and understand these instructions and markings may result in personal injury, property dam
-
age or both.
!
WARNING
!
