4. Malfunction Check
When buzzer beeps once every 40s along with alarm indicator
flashing once rapidly, the battery voltage is lower than normal
operating voltage for the smoke alarm. Replace a new battery
in time for this situation. For battery replacement, pls refer to
Battery Replacement Instruction.
When buzzer beeps once every 40s without alarm indicator
flashing, the infrared photoelectric sensor has malfunction.
For this situation, contact with vendor on time. Do not
dismount or repair alarms privately to avoid accidents.
5. Battery Replacement
When smoke
alarms have low battery warning, pls replace
the battery immediately (as Figure 5). During replacement,
mind the positive and negative polarity markings and use
below recommended 9V batteries.
Using improper battery
will cause the alarms do not work or damage
.
GOLITE: 6F22
EVEREADY
:
522
.
216
.
1222
ULTRALIFE:U9VL
DURACELL: MN1604
.
MX1604
GOLD
PEAK
:
1604P
.
1604S
.
1604A
Figure 5
NOTICE
1. The malfunction auto check function of this smoke alarm only
provides infrared photoelectric sensor malfunction check and
low battery power check. The sensor sensitivity should be
tested periodically as required.
2. To ensure the sensitivity to smoke, clean the smoke alarm
surface with soft brush or cleaner every 6 months. Do not use
solvent, liquid or detergent to clean the smoke alarm.
3. For malfunction problems, pls contact with vendor on time. Do
not dismantle and try to repair alarms privately.
4. If smoke alarms are not used for a long time, dismount them,
remove batteries, put them in packing box and store in cool
place.
5. Photoelectric smoke alarms could reduce disaster happening.
But they can not guarantee a hundred percent safety. For your
safety concern, pls use this smoke alarm correctly and know
the fire safety tips. In daily life, pay attention to build up
safety consciousness and take preventive measures.
FIRE SAFETY TIPS
Follow fire safety rules and prevent hazardous situations:
1. Store combustible liquids such as gasoline in proper containers.
2. Never smoke in bed. After smoking a cigarette, put it out and
place in a correct container.
3. Check if power sockets, plugs or switches are broken . If
cables are frayed or cracked , replace them on time.
4. Using power electric appliances such as heaters or heating
equipments, do not make the circuit overload and check
periodically if these appliances work properly.
5. Keep portable heaters and open flames, like candles, away
from flammable materials.
6. Keep matches or lighters away from children.
7. Keep at least one working fire extinguisher on every floor and
an additional one in the kitchen. Have fire escape ladders or
other reliable means of escape from an upper floor in case
stairs are blocked.
8. Make sure all the family members know what to do after
hearing an alarm signal.
9. Install smoke alarms correctly according to manual. Keep
alarms clean and do not let dust accumulate and test them
monthly. Replace them immediately if they are not working
properly.
3
4
