background image

Climate:T1

 

 

CE

All the products are in conformity with the following 

European provision:
- Low Voltage Directive 2014/35/EU
-Electomagnetic CompatibilitY 2014/30/EU

ROHS

The products are fulfilled with the requirements in the 
directive 2011/65/EU of the European parliament and of

council on the Restriction of the use of Certain Hazardous

Substances in Electrical and Electronic Equipment (EU 

RoHS Directive)

WEEE

DISPOSAL REQUIREMENTS:

Your air conditioning product is marked with this

symbol.This means that electrical and electronic

products shall not be mixed with unsorted 

household waste. Do not try to dismantle the 

system yourself : the dismantling of the air

EUROPEAN REGULATIONS

CONFORMITY FOR THE MODELS

1

1+2=

kg

R32

2

kg

2=

1=

B

C

D

F

E

kg

A

This product contains fluorinated greenhouse gases covered 

by the Kyoto Protocol. Do not vent into the atmosphere.

Refrigerant type: R32 

GWP=global warming potential

Please fill in with indelible ink,

          and

on the refrigerant charge label supplied with the product.

The filled out label must be adhered in the proximity of the 

 product charging port (e.g. onto the inside of the stop value 

A  contains fluorinated greenhouse gases covered by the 

Kyoto Protocol

B  factory refrigerant charge of the product: see unit name 

plate

C   additional refrigerant amount charged in the field

D   total refrigerant charge

E   outdoor unit

F   refrigerant cylinder and manifold for charging 

IMPORTANT INFORMATION REGA-

RDING THE REFRIGERANT USED

In accordance with the directive 

2012/19/EU

of the European

parliament, herewith we inform the consumer about the dis-

posal requirements of the electrical and electronic products.

conditioning system,treatment of the refrigerant, of oil and of

other part must be done by a qualified installer in 

accordance

with relevant local and national legislation. Air conditioners 

must be treated at a specialized treatment facility for reuse, 

recycling and recovery. By ensuring this product is disposed 

of correctly, you will help to prevent potential negative cons-

equences for the environment and humen health. Please 

contact the installer or local authority for more information. 

Battery must be removed from the remote controller and dis-

posed of separately in accordance with relevant local and 

nationl legislation.

Contains fluorinated greenhouse gases

covered by the Kyoto Protocol

cover).

CAUTION

:

Tighten the flare nut according to the specified method such as with a torque wrench.If the flare nut 

    is too tight, it may crack after prolonged use, causing refrigerant leakage.

Do not install the air conditioner at any place where there is danger of flammable gas leakage.

    In the event of a gas leakage, build-up of gas near the air conditioner may cause a fire to break out.

Take adequate steps to prevent the outdoor unit being used as a shelter by small animals.Small animals

    making contact with electrical parts can cause malfunctions, smoke or fire.

Please instruct the customer to keep the area around the unit clean
The temperature of refrigerant circuit will be high, please keep the inter-unit wire away from copper pipes

    that not thermally insulated.

Only qualified personnel can handle, fill, purge and dispose of the refrigerant.

GWP* value=675

2

          

675

Summary of Contents for JZ070-A1



























Reviews: