HEIDENHAIN TNC 620 Programming Station, User Manual

Page: 60 / 695

First Steps with the TNC 620
1.3 Programming the first part
1
60
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
Opening a new program/file management
Press the
PGM MGT
key: The TNC opens the
file manager The file management of the TNC is
arranged much like the file management on a PC
with the Windows Explorer. The file management
enables you to manage data on the internal
memory of the TNC
Use the arrow keys to select the folder in which
you want to open the new file
Enter any desired file name with the extension
.I
Confirm with the
ENT
key: The control asks you
for the unit of measurement for the new program
Select the unit of measure: Press the
MM
or
INCH
soft key
The TNC automatically generates the first and last blocks of the
program. Afterwards you can no longer change these blocks.
Further information on this topic
File management
Further Information: "Working with the file manager",
page 141
Creating a new program
Further Information: "Opening programs and entering",
page 126