HEIDENHAIN TNC 620 Programming Station, User Manual

Page: 118 / 695

Fundamentals, file management
3.1 Fundamentals
3
118
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
Working plane coordinate system WPL-CS
The working plane coordinate system is a 3-D Cartesian coordinate
system.
The position and orientation of the working plane coordinate
system depend on the active transformations in the workpiece
coordinate system.
Without active transformations in the workpiece
coordinate system, the position and orientation of
the working plane coordinate system and workpiece
coordinate system are identical.
There are no transformations in the workpiece
coordinate system on 3-axis machine tools or with
pure 3-axis machining. The
BASE TRANSFORM.
values of the active preset line are directly affective
on the working plane coordinate system with this
assumption.
WPL-CS
W-CS
WPL-CS
In the working plane coordinate system the user defines the
position and orientation of the input coordinate system with use of
transformations.
Transformations in the working plane coordinate system:
Cycle 7
DATUM SHIFT
Cycle 8
MIRRORING
Cycle 10
ROTATION
Cycle 11
SCALING FACTOR
Cycle 26
AXIS-SPECIFIC SCALING
PLANE RELATIVE
I-CS
WPL-CS
I-CS