HEIDENHAIN TNC 426, User Manual

Page: 131 / 502

HEIDENHAIN TNC 426, TNC 430 105
5.2 T
ool D
a
ta
Additional notes on tool tables
Machine parameter 7266.x defines which data can be entered in the
tool table and in what sequence the data is displayed.
Add the entered number of lines (tools) to the
end of the table.
Insert a line for the indexed tool number after the
active line. The function is only active if you are
permitted to store various compensation data for
a tool (machine parameter 7262 not equal to 0).
The TNC inserts a copy of the tool data after the
last available index and increases the index by 1.
Application: e.g. stepped drill with more than one
length compensation value.
Delete current line (tool)
Display / Do not display pocket numbers
Display all tools / only those tools that are stored
in the pocket table
You can overwrite individual columns or lines of a tool
table with the contents of another file. Prerequisites:
n
The target file must exist.
n
The file to be copied must contain only the columns (or
lines) you want to replace.
To copy individual columns or lines, press the REPLACE
FIELDS soft key(see “Copying a single file” on page 54).
Editing functions for tool tables Soft key