HEIDENHAIN QUADRA-CHEK 2000 Demo, User Manual

Page: 65 / 92

Quick Start | Conducting a measurement
5
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
65
Filtering features
You can filter the feature list in the
Features
menu by various criteria. By this
means, only those features are shown that fulfill the filter criteria (e.g., only circles
with a certain minimum diameter).
You can use any combination of filters.
Tap the
Filter
drop-down list
Select the desired filter criterion in the dialog
Select the operator
Select the function
In order to deactivate a filter criterion, deselect it
Tap
Close
to activate the filter criteria
Filter precon-
dition Operator Function
Is
Only features of the selected geometry type
are shown.
Type
Is not
Only features of the non-selected geometry
type are shown.
Equal
Only features of the specified size are shown.
Greater than
Only features that are larger than the specified
size are shown.
Size
Less than
Only features that are smaller than the speci-
fied size are shown.
Is
Only features that fulfill the selected character-
istic are shown:
Passed
Failed
Inactive
Tolerance
Is not
Only features that do not fulfill the selected
characteristic are shown.
Is
Only the selected features are shown.
Selection
Is not
Only the non-selected features are shown.
Is
Only features that fulfill the selected character-
istic are shown.
Creation type
Is not
Only features that do not fulfill the selected
characteristic are shown.