HEIDENHAIN MANUALPLUS 4110, Manual

Page: 93 / 156

HEIDENHAIN MANUALplus 4110 Linear Machining Example 7.27
Create the “Threaded stud” cycle program
Program the “Threading cycle”

Press the Add cycle soft
key
Select the Threading cycle:

Press the Thread cutting
menu key

Press the Threading cycle
menu key
Enter the cycle parameters:

Starting point X:
16 mm

Starting point Z:
4 mm

End point of thread Z2:
–29 mm

Thread pitch F1:
1.5 mm

Thread depth U:
No entry

First cutting depth I:
No entry

Tool number T:
8

Shaft speed S:
600 m/min
Assume the tool number and technology
data
from the tool file (see following
steps).