HEIDENHAIN GAGE-CHEK 2000, Operating Instructions Manual

Page: 204 / 250

Information for the Operator user | Preset
III
2.1.3 Deleting presets
Drag the
Presets
function element to the left and into the
workspace
The
Preset table
dialog box appears
The entries in the preset table can be locked to prevent
accidental modification or deletion. So you might need
to unlock an entry first in order to edit it.
If necessary, tap
Unlock
at the end of the row
The entry is enabled for editing
To select presets, tap the checkbox in the relevant row
Tap
Delete
A message appears
Close the message with
OK
The selected presets are deleted from the preset table
Tap
Close
The
Preset table
dialog box is closed
2.2 Selecting a preset
The following options are available for defining the preset of a measurement:
Activate an existing preset from the preset table
Set a position as a preset by zeroing the axis or entering a position value
Probing a preset with a touch probe
2.2.1 Activating the preset
Prerequisite:
The
Presets
function element is available on the function bar
Further information: "Adding a function element to the function bar", Page 38
The preset table contains presets
Further information: "Creating a preset table", Page 202
Tap
Presets
The
Presets
dialog box appears
Tap the desired preset
Tap
Confirm
The preset is set
The selected preset is displayed in the function element
204
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022