HEIDENHAIN GAGE-CHEK 2000, Operating Instructions Manual

Page: 38 / 250

General information | Basic operation
I
Functions for probing
Function element Short description
Edge probing (probing)
Tapping starts the wizard for probing an object of measure-
ment
Further information: "Probing functions", Page 209
Determining the center line (probing)
Tapping starts the wizard for probing an object of measure-
ment
Further information: "Probing functions", Page 209
Determining the circle center (probing)
Tapping starts the wizard for probing an object of measure-
ment
Further information: "Probing functions", Page 209
Adding a function element to the function bar
Drag an empty function bar field to the left and into the
workspace
A dialog box with all of the available function elements opens
Tap the desired function element
Tap
Close
The function element is now available
Removing a function element from the function bar
The operation of the function bar may be restricted.
Contact your OEM or Setup user.
Further information: "Function bar", Page 162
Drag the function element to the right
Tap
Delete
The function element is removed
Configuring function elements
You can configure the functions that you have assigned to the function bar.
Drag the function element to the left and into the workspace
A dialog box for configuration appears
Configure the function element
Tap
Close
The selection is saved
The procedure is identical for all function elements.
For more information on the function elements, please refer to the
“Information for the operator” chapter.
Further information: "Information for the Operator user", Page 195
38
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 06/2022