HEIDENHAIN GAGE-CHEK 2000 Series, Operating Instructions Manual

Page: 99 / 236

Commissioning | Configuring the axes
Reading deviations from the calibration standard
The manufacturer of the calibration standard usually provides you with
specifications about the deviations.
Prerequisites:
An ACF file contains the nominal values; this file must match the import
scheme of the product
Further information: "Creating an ACF import file", Page 99
Nonlinear error compensation (NLEC)
is deactivated
Tap
Settings
in the main menu
Open in succession:
Axes
General settings
Error compensation
Nonlinear error compensation (NLEC)
Tap
Read deviations of calibration standard
Navigate to the desired folder
Tap the desired file (.ACF)
Tap
Select
The nominal values are imported from the file
Creating an ACF import file
To import the calibration data into the product, you must acquire these in an ACF
file.
Open a new file in the text editor of your computer
Save the file under a unique name and the *.acf file extension
Enter the values, separated by tab stops as shown in the schema below
The following specifications apply to import files:
File names must not contain diacritics or special characters
Use a point as decimal character
7
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
99