HEIDENHAIN GAGE-CHEK 2000 Series, Operating Instructions Manual

Page: 82 / 236

Commissioning | Basic settings
7
7.4.2 Setting the date and time
Tap Settings in the main menu
Tap
General
Tap Date and time
The set values are displayed in the following format: Year,
month, day, hour, minute
To set the date and time in the middle line, drag the columns
up or down
Tap
Set to confirm
Select the desired format from the
Date format
list:
MM-DD-YYYY: Display as month, day, year
DD-MM-YYYY: Display as day, month, year
YYYY-MM-DD: Display as year, month, day
Further information:
"Date and time", Page 182
7.4.3 Setting the units of measure
You can set various parameters to define the units of measure, rounding methods
and decimal places.
Tap Settings in the main menu
Tap
General
Tap Units
To set a unit of measure, tap the corresponding drop-down
list and select the unit
To set the rounding method, tap the corresponding drop-
down list and select the rounding method
To set the number of decimal places displayed, tap
– or +
Further information:
"Units", Page 183
82
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020