HEIDENHAIN GAGE-CHEK 2000 Series, Operating Instructions Manual

Page: 181 / 236

Settings |
General
11.2.3
Display
Path: Settings
►
General
►
Display
Parameter Explanation
Digits before the decimal point
for size-adjusted axis display
The number of digits in front of the decimal point indicates the
size at which the position values are displayed. If the number of
digits in front of the decimal point is exceeded, then the display
is reduced in size so that all of the digits can be shown.
Setting range: 0 ... 6
Default value:
3
11.2.4 Input devices
Path: Settings
►
General
►
Input devices
Parameter Explanation
Mouse substitute for multitouch
gestures
Specifies whether mouse operation should replace operation
using the touchscreen (multitouch)
Settings:
Auto (until first multitouch) : Touching the touchscreen
causes mouse deactivation
On (no multitouch)
: Operation only possible with the mouse,
the touchscreen is deactivated
Off (only multitouch) : Operation only possible with the
touchscreen, the mouse is deactivated
Default setting:
Auto (until first multitouch)
USB keyboard layout If a USB keyboard is connected:
Language selection of the keyboard assignment
11
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
181