HEIDENHAIN 548431-05, User Manual, Page: 571 / 722

Tool and technology database | Tool editor mode of operation
8
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
571
Holder editor
The graphic tool representation functions in
Simulation
submode
take account of the shape of the tool holder and the mounting
position on the tool carrier.
Further information: "Tool control graphics", Page 565
Further information: "3-D simulation in Simulation submode",
Page 554
In the
to_hold.hld
tool holder table, you can define the holder type
and the setting gauges of the tool holder.
Proceed as follows to edit the tool holder table in
Tool editor
mode of operation:
Press the Other tables soft key
Press the
Holder editor
soft key
The tool holder table contains the following entries:
NR : Line number
HID
:
Holder name
– Unique holder name (max. 16 characters)
MTS : Manual change system
0: Tool holder
1: Manual change tool
XLH : Setup dim. in X
YLH
:
Setup dim. in Y
ZLH : Setup dim. in Z