HEIDELBERG Suprasetter A52, Installation Manual

Page: 76 / 86

Installation
74
Dual Top Loader (Option)
Format setting on insertion table, bottom
Fig. 75 Insertion table, bottom
Taller format guides for as many as 150 printing plates
Fig. 76 Taller format guides
Set the format guides (Fig. 75 /1) according to the
size required.
For operation with the insertion table only (with-
out a tray), the format guides (Fig. 76/1) can be
replaced by format guides with a greater side
length (part of the accessories).
To do this, move the format guides towards the
center, to the larger opening, and remove
upwards.
Insert the format guides with the taller side length
and set them according to the size required.
The maximum format that can be set is 676 X 760
mm.